Posts

Siding

Image
October 25 - November 4, 2020   After we finished building our new house in 2008 we demolished the old Norton house we had been living in. It was built around 1930.  In these parts the way folks tend get their demolishing done is to use a piece of heavy equipment to smush the structure into a large pile then set it on fire.  We were interested in salvaging the materials, especially the lumber - chestnut and old growth pine were the materials of choice back then. Luckily we have a son - at the time unmarried and not yet in graduate school - who was available to help out his parents. There was plenty there that was certainly junk - mostly what was added after the original construction - like the asphalt siding over the pine siding you see above. Recovering materials involves substantial nail removal elbow grease: Over the years since then I've used a little of the interior siding, for example the doors on our garbage and recyclables closet: However most of flooring and sid...

Porch Ceiling, Door and Trim

Image
November 5-15, 2020 Next up was the ceiling of the porch. The original house had ceilings and interior walls made of classic pine beadboard. I selected some that had the remains of a blue wash paint. Here they are laid out to get a good scrub because once they are on the ceiling they won't see water again. These are attached with 1-1/2" staples from my pneumatic stapler. Since the beadboard is only 1/4" thick, staples work much better than screws or brads. The tricky part of this work is getting the tongue-and-groove to seat well for the entire length. The technique I use is to get something that will fit into the groove of the board being installed then leverage against the outer 2x4 to push it really tight into the board that is already up at each rafter point before stapling it. Doing it by myself made me wish I had one or even two more arms. It was time for the last really difficult part of this project: hanging the door. I was given a beautiful entry d...

Interior and Electrical

Image
November 16-25 QA Junior was not happy about the esthetics and long term durability of exposed Tyvek on the inside. My original thinking was that it had its advantages - light walls help with visibility and more importantly the exposed studs provide a built-in rack system for storing tools. Junior QA pointed out that 1/4" plywood doesn't cost that much (per sheet anyway) and I promised I'd look into it.   In the process of pulling out siding from the old house stash I noticed we had some 1/2" boards that had been used in the upstairs/attic of the old house as a kind of minimal wallboard. I'd forgotten about that until I saw it in the pile: Using it for the shed interior is the perfect application for this salvage wood as it is insubstantial, uneven and rarely straight. Since I wanted to keep the studs exposed, that meant putting the boards between the studs, and the studs are straight, so we got a conflict there. I could start with the widest and longest boards: ...